1. Get to recognise the 3 key elements
these connectors are a crew of three! First, there’s the "bolt" – a threaded rod like a small screw. Then the "eccentric wheel" – a spherical disc with a hole within the middle and a tiny notch on the facet. ultimately, the "plastic insert" – a small tube that helps preserve the entirety in place. Lay them out earlier than starting, like sorting puzzle portions – mixing them up will best gradual you down!
2. Drill holes with care
seize a ruler and mark wherein the holes pass to your furniture boards. First, make a small hollow for the plastic insert. Drill it just deep enough so the insert sits flush with the board’s surface – faucet it lightly with a hammer if wanted. on the matching board, drill holes: one immediately via (so the bolt can bypass via) and a facet hollow that’s precisely the dimensions of the eccentric wheel – it wishes to healthy snuggly.
3. collect step by step (it’s like Lego!)
Screw the bolt into the plastic insert till most effective 3-5mm of the rod stands proud – an excessive amount of and it won’t match. Line up the second board so the bolt slides thru its hole. Now discover the facet hollow, pop inside the eccentric wheel, and twist it lightly. whilst you hear a "click," the notch has stuck the bolt’s head – the boards are locked tight!
4. pro guidelines for smooth meeting
If the wheel gained’t turn, check if the holes line up – no forcing! leave the bolt barely loose in the beginning to modify positions. After building, provide the fixtures a shake. If it wobbles, twist the eccentric wheel a touch tighter. Don’t stress if it takes a try or two – soon you’ll be a seasoned at these handy connectors!
