Aluminum alloy doors and windows are long lasting, waterproof, and stylish. the following is an creation to the specifications and fashions of aluminum alloy door and window profiles, as well as set up precautions.
I. specifications and models of Aluminum Alloy Door and Window Profiles
The specifications consist of extra than a dozen series starting from 35 to a hundred, wherein the numbers 35-one hundred talk over with the thickness of the door and window frames in millimeters. The not unusual collection for enclosed balconies are 70 or ninety; sliding doorways often use 70 and 90 collection; sliding windows typically use 55, 70, and 90 collection; hinged doors often use 50, 55, and 70; hinged home windows normally use forty, 50, and 70; spring doors typically rent 70 and 100 series.
II. installation Precautions for Aluminum Alloy doors and windows
1. The quantity and size of profiles ought to meet requirements. The thickness of aluminum alloy frames need to be greater than 2.4 millimeters, at the same time as that of plastic metal have to exceed 2.5 millimeters.
2. take a look at the appearance of the plastic; profiles of qualified best need to show a blue-white or ivory-white coloration that is smooth and easy, and need to come with defensive film.
3. Door and window components want to be securely related, with corrosion-resistant materials used to fill and seal components to beautify waterproofing and sealing.
4. choose the corresponding cloth segment consistent with the hole length and peak; hinged windows need to be more than 55 millimeters, and sliding home windows more than 75 centimeters.
5. doors and home windows require drainage; drainage holes must be unobstructed and organized in line with the desired number and region. notice: outside doors and home windows ought to have at the least 2 drainage holes with a diameter more than 8 millimeters.
6. deploy in step with regulations to ensure the doors and windows are strong and at ease.
III.the way to address Water Leakage in Aluminum Alloy doors and home windows
1. First, pick out the supply of leakage:
a. Window: Leakage can also arise if set up was incorrect.
b. at the pinnacle of the window: observe silicone sealant on the junction of the window and wall; that is additionally applicable for facet leakage.
c. bottom: If the outer platform has a slope, apply silicone sealant without delay at the bottom seam of the window; if there is no slope, first apply waterproofing at the platform, then use cement to create a slope, and eventually seal the seam at the lowest of the window with silicone.
2. test if the drainage holes direct water to the outer windowsill; if no longer, seal the hole and re-drill it.
3. inspect the outside window frame and windowsill for sealing repute. If there are gaps inside the sealing, it could be essential to cast off the old sealant and re-seal.
In summary, the above presents some insights into the specs and fashions of aluminum alloy door and window profiles, along side set up precautions. For extra associated facts, please maintain to observe our website, where we can present more interesting content material in the future.
