The parking spaces are composed of individually marked areas on the floor, and we can determine precise parking areas from the painted lines. permit's test what type of paint is used for these car parking zone strains.
I. What form of paint is used for parking space traces
normally, substances along with thermoplastic road marking paint, -issue polyurethane paint, and road marking paint are used for marking parking areas. the choice can depend on the place of use; for instance, outside open parking areas have higher requirements for sturdiness, weather resistance, and colorfastness, so specialised road marking paint or thermoplastic road marking paint is greater appropriate. If it is for underground parking areas, the requirements are lower, and two-aspect polyurethane paint or epoxy coatings will suffice.
amongst those types of marking paints, avenue marking paint has higher characteristics. it is frequently used for zebra crossings, street lane markings, and other road signage; it's far classified as a brief-drying paint and dries particularly fast—generally usable only some hours after application. It additionally boasts capabilities like wear resistance, pressure resistance, and UV resistance, making it very durable in use. In phrases of software, it offers flexibility, making an allowance for rolling, brushing, and spraying methods.
II. What to take note of whilst marking parking areas
1. Cleanliness
earlier than marking the lines on the surface, it is critical to clean the region thoroughly via casting off dust, particles, and ensuring it's far dry. If the floor is damp or if it's far frozen floor, marking can't be carried out because the marking paint has certain environmental requirements concerning humidity and temperature, with humidity not exceeding eighty% and temperature no longer being lower than five levels Celsius.
2. Paint dosage
while marking parking space strains, it's far essential to manipulate the dosage, or the quantity of paint used, which have to be maintained at approximately 1 kilogram for each 4-five square meters.
3. software system
Parking area line marking can be finished via brushing or rolling, and no matter the chosen technique, coats need to be applied. the second one coat have to simplest be carried out after the primary one has dried, and the thickness of the paint layer need to be maintained between zero.2 and 0.5 mm.
In precis, by now, you have to have a better know-how of what kind of paint is used for parking area traces. if you need to learn extra associated expertise, sense unfastened to follow us!
