1. prepare tools and components
putting in couch legs is awesome clean, and also you don’t want many gear. You’ll want a Phillips screwdriver (or a power drill for greater ease), the couch legs themselves, and the screws that come in the bundle—usually 4-eight, depending at the couch size. First, flip the sofa over so the bottom faces up, and find the pre-drilled holes; they appear like little black holes, easy to spot.
2. determine out the leg positions
sofa legs may look the identical, however it’s satisfactory to region them by role. as an example, a square sofa normally has one at each corner; an L-shaped couch may have two more. whilst setting, align the screw holes with the ones on the sofa base—don’t placed them backwards. If the legs have rubber pads, ensure they face the ground to prevent slipping and scratching.
3. guidelines for screwing
pick up a settee leg, maintain it gently against the hollow, and use the screwdriver to curl within the screw. Don’t tighten it all of the way at the beginning—simply enough to hold it. make certain all 4 legs are degree before tightening each one fully. If a screw gained’t flip, don’t force it; check if the hollow is misaligned—twisting crookedly can strip the threads.
4. finally, take a look at balance
flip the couch lower back over and deliver it a gentle shake to look if it wobbles. If it does, loosen the wobbly leg, slip a small piece of paper underneath it to stage, then retighten. additionally, sense the bottom of every leg to make certain the rubber pads are comfortable—this manner, your floor gained’t get scratched. The complete process takes 10 minutes—high-quality smooth, right!
