1.earlier than sticking door and window seal strips, complete preparations are wished. First, clean up the dirt, oil stains and particles at the door and window frames. you may wipe them with a cloth dipped in clean water or impartial detergent, then dry them with a dry material to make sure the surface is dry and easy. that is the important thing to ensuring the seal strips stick firmly.
2.next, measure the period and width of the door and window frames. cut the seal strips in line with the size outcomes. when slicing, the duration can be slightly longer to facilitate subsequent adjustments. Then tear off the adhesive paper at the back of the seal strip. Be careful no longer to tear it all off immediately; you could first tear off approximately five centimeters at one cease.
3.Align the quit with the torn adhesive paper to the beginning function of the door and window frame, press it gently to fix it, then slowly tear off the final adhesive paper while pressing the seal strip calmly alongside the door and window body to make sure it fits tightly with the body without bubbles or wrinkles. Pay special attention to the corners. The seal strip may be slightly bent to make the suit greater natural.
4.After pasting, check whether or not the seal strip is flat and company. If there may be any element that doesn't match, press and regulate it once more via hand. try and avoid frequent beginning and last of doors and windows inside 24 hours to permit the adhesive to absolutely play its role, with a purpose to reap a very good sealing impact.
