The renovation procedure is interlinked—putting in wood flooring too early or too overdue can easily reason problems. bear in mind those key nodes, and the development may be carried out smoothly～
I. preferred Premise for set up: in any case tough ornament Is finished
timber flooring ought to be mounted most effective after all tough decoration is finished! duties which include wall painting, tile pasting, ceiling installation, and door and window set up need to be completed first. because paint from wall painting and cement mortar from tile pasting, if splashed at the wood floor, are hard to smooth and could harm the surface; moreover, while the hard decoration is not finished, there is a lot of dust on the construction site, and installing the floor in advance can be protected with dirt, making later cleansing extraordinarily tough.
II. connection with custom furniture: earlier than putting in floor-standing shelves, After installing Suspended cabinets
while matching with custom furniture, it relies upon on the scenario: for floor-status furnishings inclusive of wardrobes and shoe shelves, set up the timber floor first, then the furnishings, so that the furniture is directly positioned on the flat floor, with small gaps and better stability; for non-floor-standing fixtures consisting of wall cabinets and suspended television cabinets, deploy the furniture first, then lay the floor, to keep away from equipment touching the furniture whilst laying the floor, and additionally make the connection between the ground and the bottom of the fixtures greater neat.
III. unique instances: adjust in keeping with floor kind
The set up time of different floors is barely one of a kind: stable wooden floors are fearful of moisture, so they must be set up after the walls and flooring are completely dry (typically ventilated for 1-2 weeks after tough decoration), otherwise they are clean to warp and mold; laminate floors have top balance and may be hooked up after the tough decoration is completed, however the ground base should additionally be dry; floating floors do no longer want glue and may be laid after putting in custom furnishings (suspended type), at once tucked below the furniture to reduce gaps.
IV. guidance earlier than installation: floor and surroundings need to Meet standards
two extra things need to be achieved earlier than putting in the floor: first, check the floor base, which must be flat, smooth and dry. Grind off any protrusions and repair any depressions with cement mortar; second, manage the indoor humidity. If it's far too humid (inclusive of throughout the rainy season), activate the air conditioner to dehumidify first, and the humidity is maximum appropriate to be stored among forty% and 60%. With right preparation, the ground may be set up flat and used for an extended time.
